CNC Tezgah - Makina İhtiyaçlarınızı bildiriniz!.. Hızlı Çözüm Sunalım!..   0 533 748 30 91   

30 Mayıs 2018 Çarşamba

PROKING CNC Heavy-Duty Ağır İş Tornalama Tezgahları - Ağır İş CNC Torna Tezgah İhtiyaçlarınızı bize bildiriniz!



PROKING LC Serisi CNC Heavy Duty Torna Tezgahları LC-35 LC-40 LC-45 LC-50
Swing over bed 880mm 1,010mm 1,135mm 1,275mm
Swing over cross slide 510mm 630mm 760mm 900mm
Distance between centers 1,500mm~12,000mm in 40" increments
Spindle nose A2-11~A2-32
Spindle bore 6"~22"
Spindle motor Standard-30HP ; Option-40HP,50HP
Controller FANUC / FAGOR / SIEMENS
ITEM UNIT LC-35 LC-40 LC-45 LC-50
CAPACITY
Centre height mm (in.) 445 (17.51) 510 (20.07) 575 (22.63) 645 (25.39)
Swing over bed mm (in.) 880 (34.64) 1010 (39.76) 1135 (44.68) 1275 (50.19)
Swing over cross slide mm (in.) 510 (20.07) 630 (24.80) 760 (29.92) 900 (35.43)
Distance between centres mm (in.) 1500 (59.05), 2000 (78.74), 3000 (118.11),
4000 (157.48), 5000 (196.85), 6000 (236.22),
7000 (275.59), 8000 (314.96), 9000 (354.33),
10000 (393.70), 11000 (433.07), 12000 (472.44)
BED
Width mm (in.) 560 (22.04)
CARRIAGE
Width of cross slide mm (in.) 350 (17.77)
TURRET
Standard tool post Auto 4-way / Polygon Disc / VDI disc
No. of tool stations H4;H6 / V12 / V8;V12
Turning Tool Size mm (in.) 32 x 32 (1.25)
Boring Tool Size(max.) mm (in.) 63 (2.5)
TRAVEL
Cross slide(X axis) travel mm (in.) 630 (24.8)
Longitudinal(Z axis) travel mm (in.) 1500 (59.05), 2000 (78.74), 3000 (118.11),
4000 (157.48), 5000 (196.85), 6000 (236.22),
7000 (275.59), 8000 (314.96), 9000 (354.33),
10000 (393.70), 11000 (433.07), 12000 (472.44)
Cutting feed rate mm(in.)/rev X axis : 0.001~250(0.00004~9.84) ; Z axis : 0.001~400(0.00004~15.75)
Rapid travel M.(Ft.)/min X axis : 6(19.68) ; Z axis : 6(19.68)
Ballscrew diameter mm (in.) X axis : 50(1.96) ; Z axis : 80(3.14)
TAILSTOCK
Quill type Built-in type, Rotating tailstock quill
Quill diameter mm (in.) 235(9.25)
Quill travel mm (in.) 200(7.87)
Internal taper of quill MT#6
MOTOR
Headstock oil refrigerator 18,000BTU(4,500Kcal)
Main spindle KW(HP) 30/37(40/50)-STD. ; 37.5/45(50/60)-OPT.
Axis servo KW(HP) X axis : 7(9.387) ; Z axis : 7(9.387)
Hydraulic tank KW(HP) 3.7(5)
Coolant pump KW(HP) 1.05(1.4)
Controller FANUC 0i-TF series-STD ; FANUC 31i-B series / Other required-OPT.
Note :
(1) X and Z axes actual cutting diameter will change when equipped with different turrets.
(2) Specifications are subject to change without notice for improvement

Outstanding Features
One piece bed, floor type casting.
Alloy steel spindle with opposed taper roller bearings.
All gears in the headstock are hardened and precisely ground.
Automatic ranges of spindle speed through pneumatic gear shift.
Spindle speed ranges are automatically changed by M code.
Infinitely variable speed are commanded by S code.
Tool change are commanded by T code.
Auto lubrication system is equipped for headstock, carriage, and cross-slide.
Precision tapered roller bearings are equipped on the spindle and the quill.
The quill is heat treated and precisely ground.
Internal taper of quill to suit MT#6 dead center or live centre.
Turcite B anti friction material is applied on cross slide and carriage for reduce friction.
X and Z axis ballscrews are protected by covers to prevent ingress of swarf / chips and coolant.
Standard Accessories
Hydraulic H4 turret.
Rotating tailstock quill with 235mm diameter.
Motorized tailstock body and quill movement.
FANUC 0i-TF series complete with manual guide and thread repair.
Front and rear chip conveyor.


PROKING SS Serisi  45° Dereceli Eğimli SLANT BED Tornalama Tezgahları SS-31 SS-35
Swing over bed 750mm 850mm
Swing over cross slide 670mm 770mm
Distance between centers 700mm to 1700mm in 20" increments
2200mm to 5200mm in 40" increments
Spindle nose A2-11~A2-28
Spindle bore 6"~18"
Spindle motor Standard-30HP ; Option-40HP
Controller FANUC / FAGOR / SIEMENS
ITEM UNIT SS-31 SS-35
CAPACITY
Centre height mm (in.) 505 (19.88) 555 (21.85)
Swing over bed mm (in.) 750 (29.52) 850 (33.46)
Swing over cross slide mm (in.) 670 (26.37) 770 (30.31)
Distance between centres mm (in.) 700 (27), 1200 (47), 1700 (67), 2200 (86)
3200 (126), 4200 (166), 5200 (206)
BED
Width / Slant angle mm (in.) / deg 1145 (45.07) / 45°
CARRIAGE
Width of cross slide mm (in.) 500 (19.68)
TURRET
Standard tool post Polygon Disc / VDI disc
No. of tool stations V12 / V8;V12
Turning Tool Size mm (in.) 32 x 32 (1.25)
Boring Tool Size(max.) mm (in.) 63 (2.5)
TRAVEL
Cross slide(X axis) travel mm (in.) 420 (16.53)
Longitudinal(Z axis) travel mm (in.) 700 (27), 1200 (47), 1700 (67), 2200 (86)
3200 (126), 4200 (166), 5200 (206)
Cutting feed rate mm(in.)/rev X axis : 0.001~250(0.00004~9.84) ; Z axis : 0.001~400(0.00004~15.75)
Rapid travel M.(Ft.)/min X axis : 6(19.68) ; Z axis : 6(19.68)
Ballscrew diameter mm (in.) X axis : 50(1.96) ; Z axis : 80(3.14)
TAILSTOCK
Quill type Built-in type, Rotating tailstock quill
Quill diameter mm (in.) 160(6.29)
Quill travel mm (in.) 200(7.87)
Internal taper of quill MT#5
MOTOR
Headstock oil refrigerator 18,000BTU(4,500Kcal)
Main spindle KW(HP) 30/37(40/50)-STD. ; 37.5/45(50/60)-OPT.
Axis servo KW(HP) X axis : 7(9.387) ; Z axis : 7(9.387)
Hydraulic tank KW(HP) 3.7(5)
Coolant pump KW(HP) 1.05(1.4)
Controller FANUC 0i-TF series-STD ; FANUC 31i-B series / Other required-OPT.
Note :
(1) X and Z axes actual cutting diameter will change when equipped with different turrets.
(2) Specifications are subject to change without notice for improvement

Outstanding Features
One piece bed, 45° slant bed construction ensures maximum stability and convenient chip disposal.
Alloy steel spindle with opposed taper roller bearings.
All gears in the headstock are hardened and precisely ground.
Automatic ranges of spindle speed through pneumatic gear shift.
Spindle speed ranges are automatically changed by M code.
Infinitely variable speed are commanded by S code.
Tool change are commanded by T code.
Auto lubrication system is equipped for headstock, carriage, and cross-slide.
Precision tapered roller bearings are equipped on the spindle and the quill.
The quill is heat treated and precisely ground.
Internal taper of quill to suit MT#5 dead center or live centre.
Turcite B anti friction material is applied on cross slide and carriage for reduce friction.
X and Z axis ballscrews are protected by covers to prevent ingress of swarf / chips and coolant.
Standard Accessories
V12 turret.
Rotating tailstock quill with 160mm diameter.
Motorized tailstock body and quill movement.
FANUC 0i-TF series complete with manual guide and thread repair.
Front chip conveyor.



PROKING PA Serisi 2 Shear Bed Way Tornalama Tezgahları PA-35 PA-40 PA-45 PA-50
Swing over bed 880mm 1,010mm 1,135mm 1,275mm
Swing over cross slide 615mm 745mm 875mm 1,015mm
Swing over gap 1,340mm 1,470mm 1,600mm 1,740mm
Distance between centers 1,500mm~12,000mm in 40" increments
Spindle nose A2-11~A2-32
Spindle bore 6"~14" 6"~14" 6"~18" 6"~22"
Spindle motor Standard-20HP ; Option-25HP,30HP,40HP,50HP

ITEM UNIT PA-35 PA-40 PA-45 PA-50
CAPACITY
Centre height mm (in.) 445 (17.51) 510 (20.07) 575 (22.63) 645 (25.39)
Swing over bed mm (in.) 880 (34.64) 1010 (39.76) 1135 (44.68) 1275 (50.19)
Swing over cross slide mm (in.) 615 (24.21) 745 (29.33) 875 (34.44) 1015 (39.96)
Swing over gap mm (in.) 1340 (52.75) 1470 (57.87) 1600 (62.99) 1740 (68.50)
Gap width from headstock(opt.) mm (in.) 600 (23.62)
Distance between centres mm (in.) 1500 (59.05), 2000 (78.74), 3000 (118.11),
4000 (157.48), 5000 (196.85), 6000 (236.22),
7000 (275.59), 8000 (314.96), 9000 (354.33),
10000 (393.70), 11000 (433.07), 12000 (472.44)
BED
Width (W/O auxiliary guide) mm (in.) 560 (22.04)
Width (W auxiliary guide) mm (in.) 660 (25.98)
CARRIAGE
Cross slide travel mm (in.) 670 (26.37)
Compound tool post travel mm (in.) 450 (17.71)
4-way tool post width mm (in.) 205 (8.07)
THREAD FEED RANGE
Longitudinal feed mm/rev (in.rev) 0.045~2.55 (0.0018~0.1)
Cross feed mm/rev (in.rev) 0.023~1.28 (0.0009~0.05)
Longitudinal rapid feed mm/rev (in.rev) 2000 (78.74)
Cross rapid feed mm/min (in/min) 1270 (50.00)
Metric thread mm (kinds) 1~56 (60)
Inch thread TPI (kinds) 1/2~28 (60)
Module thread MOD (kinds) 0.25~14 (60)
Diamteral pitch thread DP (kinds) 2~112 (60)
Pitch of leadscrew mm (TPI) 12 (2)
TAILSTOCK
Quill diameter mm (in.) 115 (4.52)
Quill travel mm (in.) 200 (7.87)
Inner taper of quill MT#6
Bearing surface on the bed ways mm (in.) 500 (19.68)
MOTOR
Main spindle motor KW (HP) 14(20)-STD.
18(25) / 22(30) / 29(40) / 37(50)-OPT
Coolant pump motor KW (HP) 0.1 (0.125)
Note :
(1) X and Z axes actual cutting diameter will change when equipped with different turrets.
(2) Specifications are subject to change without notice for improvement

Outstanding Features
One piece bed, floor type casting.
2 shear bed way with extra way supporting the apron.
All ways are hardened and ground.
Alloy steel spindle with opposed taper roller bearings.
Hardened and ground gears, shafts.
Electromagnetic spindle brake.
18-speed geared headstock.
6-way rapid traverse and power feed to top slide.
Totally enclosed universal inch / metric gear box.
Carriage position device.
Dual voltage spindle motor, 20 to 50 HP.
Pressurized one shot lube system for cross slide and carriage.
Standard Accessories
1 dead centre, MT #6.
2-speed tailstock quill (manual).
One piece stainless steel leadscrew cover.
Coolant pump.
Follow type splash guard.
Rear side chip and water collect plate.
Thread chasing dial.
Water and oil collect plate under apron.
Work lamp.

www.CNCBUL.com    +90 533 748 30 91   E-posta : taner.perman@cncbul.com

Hiç yorum yok:

Yorum Gönder